EGR Delete Kit to suit Toyota Landcruiser 79/100 Series (HDJ78 or HDJ79 Series) with the 1HD-FTE engine.
The EGR valve in the FTE engine creates an area that attracts particulate matter from the EGR system operation. This leads to a buildup that begins to block and restrict the flow of air into the engine. It can also lead to the valve sticking partially open, causing excessive smoke, poor fuel economy, and overall lack of performance.
The Tillix EGR Valve Delete Kit removes this valve from the intake stream, so this problem can no longer occur.
A plate is also provided to blank the other end of the EGR pipe (top/rear) of the exhaust manifold. Should you wish to remove it all together.
Genuine Toyota gaskets are supplied with each kit as well as blanking bungs for the 1/8″ and 1/4″ ports if they are not to be used.
- The intake block comes pre drilled and tapped with 1/8″ and 1/4″ BSP blind holes.
- The 1/8″ Port would usually be used as a boost gauge reference point.
- And the 1/4″ Port could be used for a Water/Methanol injection system if desired.
- The ports can be fitted facing forward or rearward, depending on the requirements of the setup.
Fitting Instructions coming soon – https://www.tillix.com.au/downloads/
Disclaimer: This product is intended for off-road or race use only.
Reviews
There are no reviews yet.